While Cool Tools Antique Molds are great for making satisfying charms and pendants by firing exactly what you pull from the molds, they also offer opportunity to create unique pieces by manipulating the clay once it has been removed from the mold. I made both pieces by beginning with the Wild Child Antique Mold with EZ960® Sterling Silver Clay. In both pieces I thought it would be nice to remove the background, and cut away the silver clay in the background with my Ultra Clay Pick while the clay was still soft. For the piece pictured on the right, I also pressed clay into the Sunshine and Lace Antique Mold and decided I wanted to work with mostly the ends. I gently placed the Wild Child piece on top of the Sunshine and Lace piece and scribed a line to follow and cut away the middle so the pieces from The Sunshine and Lace Piece will line up perfectly with the edges of the Wild Child piece. Once I cut away the excess from the Sunshine and Lace piece, I gently dampened the edges that met with a small amount of distilled water on a brush before adding just a touch of EZ960 Sterling Silver Paste from a syringe to the edge and pressing them together. I used the brush to run over the seam to smooth it out before allowing the piece to dry and refining the edges of the piece as a whole by sanding it while it was in its greenware stage. I fired the clay piece before soldering a pin back to the back so it may be worn as a brooch. I created the piece on the center in a similar way, only I was only working with only the Wild Child Antique Mold. I pressed clay into just the flower portion of the mold (located in her hair) and made small flowers that I attached to the main piece with paste. Once I was happy with my design, I allowed the piece to dry before cleaning it up, firing it, and soldering on a pin back as I did in the first piece. I hope this inspires you to put your own spin on an Antique Mold, the possibilities are endless with so many to choose from! Cool Tools Antique Molds are made from 100% silicone mold material that does not stick to metal clay, or any other type of clay, so no release is needed. Molds are reusable and can be placed on a heat source to dry clay. Safe to 500°F. Use molds to create a pendant, earrings or a focal point on a cuff.