Tag Archives: antique mold

Creating with Antique Molds by Karen Trexler

While Cool Tools Antique Molds are great for making satisfying charms and pendants by firing exactly what you pull from the molds, they also offer opportunity to create unique pieces by manipulating the clay once it has been removed from the mold. I made both pieces by beginning with the Wild Child Antique Mold with EZ960® Sterling Silver Clay. In both pieces I thought it would be nice to remove the background, and cut away the silver clay in the background with my Ultra Clay Pick while the clay was still soft.

For the piece pictured on the right, I also pressed clay into the Sunshine and Lace Antique Mold and decided I wanted to work with mostly the ends. I gently placed the Wild Child piece on top of the Sunshine and Lace piece and scribed a line to follow and cut away the middle so the pieces from The Sunshine and Lace Piece will line up perfectly with the edges of the Wild Child piece. Once I cut away the excess from the Sunshine and Lace piece, I gently dampened the edges that met with a small amount of distilled water on a brush before adding just a touch of EZ960 Sterling Silver Paste from a syringe to the edge and pressing them together. I used the brush to run over the seam to smooth it out before allowing the piece to dry and refining the edges of the piece as a whole by sanding it while it was in its greenware stage. I fired the clay piece before soldering a pin back to the back so it may be worn as a brooch.

I created the piece on the left in a similar way, only I was only working with only the Wild Child Antique Mold. I pressed clay into just the flower portion of the mold (located in her hair) and made small flowers that I attached to the main piece with paste. Once I was happy with my design, I allowed the piece to dry before cleaning it up, firing it, and soldering on a pin back as I did in the first piece.

I hope this inspires you to put your own spin on an Antique Mold, the possibilities are endless with so many to choose from!

 

 

 

 

 

 

 

 

 

 

Cool Tools Antique Molds are made from 100% silicone mold material that does not stick to metal clay, or any other type of clay, so no release is needed. Molds are reusable and can be placed on a heat source to dry clay. Safe to 500°F. Use molds to create a pendant, earrings or a focal point on a cuff.

Antique Mold Charm Bracelet by Annie Kilborn

The “Antique Mold Charm Bracelet” is a great project for beginners. The simple techniques make a wonderful bracelet, which looks very complex due to all the wonderful elements made from our Antique Molds. We have a huge selection of Antique Molds, with over 800 offered. You can choose to use all of the mold, or just a fragment of it. One of the great things about a charm bracelet is that you get to pick and choose the elements that appeal to you. The individualized compilation of the charms tells a unique story.

After you have chosen the Antique Molds and clay(s), you are ready to begin the project. I chose to work with Hadar’s Clay One-fire High-fire Clays.  Any clay(s) would work well for this project. It would look amazing in FS999 or EZ960 with our new Nano Gems embedded in the charms or set as charms on their own.

I began with Hadar’s Clay One-Fire Copper Clay. I hadn’t had experience with firing copper wire into base metal clays, so I made the seahorse and rose charm with the copper jump  ring embedded into the clay as test samples. After I molded, dehydrated and finished the edges of the forms, I carved out a groove in the back where I wanted the jump ring to nestle. It is important that the jump ring rests below the surface of the backside. After a good fit is found for the jump ring, secure it into place with some paste and clay. Dry out the clay, do any final clean up and fire. I used the recommend firing schedule for Hadar’s Clay One-Fire Copper Clay. The jump rings fired into the clay well. I continued this process for the remainder twelve molds using the other six Hadar’s Clay One-Fire High-Fire Clays. I fired all of these clays together using Hadar’s recommend firing schedule for combined firing.

Once all the charms were fired, I attached them to the “Patterned Wire Chain Bracelet” created for a previous blog. The bracelet was patinated with Patina Gel, buffed with a brass brush and tumbled. After tumbling I did a final polishing with the Ultra Polishing Pads.

I did have some issues with the jump rings dislodging from the two copper pieces during tumbling. I did not have this issue with the other clays. I believe that I thinned out the clay a little too much, which I used to embed the jump ring. This left the clay vulnerable to breaking. To fix this issue, the jump rings were soldered on to the copper pieces with paste solder and a butane torch. I am planning to remake and fire the copper charms to test whether my first clay connections were faulty, or if copper wire does not like to fuse to copper clay. Also, I did tumble the Steel XT and the Pearl Grey. These are steel clays, and they did rust a bit from the water in the tumbler. I would not recommend tumbling these clays. They will look better from just using dry polishing methods. I hope that my “Antique Mold Charm Bracelet” inspires your own custom charm bracelet. Listed below are all of the materials, tools and antique molds I used for this project.

 

 

 

Materials Used:

 

 

 

 

Tools Used:

Bowl for mixing clays

Distilled water

Mini Palette Knife

CoolSlip Anti-Stick Solution

Cool Tools Slik Metal Clay Conditioner and Release

Non-Stick Big Roller 

Tuff Cards – 2.5″ x 3.5″

Cool Tools Clayboard Non-Stick Work Surface 9″ x 9″

Texture Tile – Kazakh Vertical 

Ultra Clay Pick

Tidy Tray – Sanding Tray Small 6″ x 8″

Needle File Set – 6 Pieces – Cut 4

Tropical Shine Sanding Sticks

Foam Healing Tool

Carving Set

Bronze & Copper Clay Firing Kits

Patina Gel 

Scratch Brush – Brass – 4 Row Soft

Lortone® Tumbler

Ultra Polishing Pads

Silver Solder Paste – Medium 1/2oz

Torch – Firefox – Butane Mini Torch

Antique Molds (In order according to the picture):

Horse of the Sea

Star Rose

Xysticus

Halloween Gravestone

Dreamy Dragonfly

Out of the Brush

LOVE

Master Key

Roped Anchor

Give a Hoot

Young Peacock

Comedy/Tragedy

Pretty Purse

Two by Two